Get webhook notifications whenever Network & Infrastructure creates an incident, updates an incident, resolves an incident or changes a component status.
Suite au bug CSCuu07598 sur 7.1.1, certain fex se trouve en single attach et des uplinks sont down sur un n5
Nous allons reloader ce n5 pour revenir dans un état stable. pas de coupure a prévoir, les uplinks et les port de fex down sont uniquement sur ce n5
Aussi, dans la nuit du 30 au 31, nous allons faire un roll-back vers la 7.0.5 qui ne contient pas le bug
C'est le safe choice en attendant la release 7.1(2)
Le downgrade est disruptif...
##
Pour rappel, ce couple a été mis a jour en release 7.1.1 pour correction de bug ainsi que le support des fex2348 (48x10g base-T)
Cette release ré-introduit un vieux bug sur les n5548*p* qui coupe des ports du châssis (not connect) et on ne peut les re-uppé qu'avec un reload.
Il existe un work around avec une commande de debug, cependant, cela ne fonctionne pas sur ce couple....
Update(s):
Date: 2015-07-30 23:06:26 UTC J'ai fais le tour avec les équipes datacentre et tout semble okay
Software
BIOS: version 3.6.0
loader: version N/A
kickstart: version 7.0(5)N1(1a)
system: version 7.0(5)N1(1a)
Power Sequencer Firmware:
Module 1: version v5.0
Module 3: version v2.0
Date: 2015-07-30 22:29:13 UTC [This step might take upto 20 minutes to complete - please wait.]
[*Warning -- Please do not abort installation/reload or powercycle fexes*]
[####################] 100% -- SUCCESS
Finishing the upgrade, switch will reboot in 10 seconds.
Date: 2015-07-30 22:21:30 UTC les n5 vont preloader les images sur les fex pour limiter le downtime lors du reload final
Pre-loading modules.
[This step might take upto 20 minutes to complete - please wait.]
[*Warning -- Please do not abort installation/reload or powercycle fexes*]
Date: 2015-07-30 22:16:38 UTC Compatibility check is done:
Module bootable Impact Install-type Reason
------ -------- -------------- ------------ ------
1 yes disruptive reset new image is incompatible
3 yes disruptive reset new image is incompatible
100 yes disruptive reset new image is incompatible
101 yes disruptive reset new image is incompatible
102 yes disruptive reset new image is incompatible
103 yes disruptive reset new image is incompatible
104 yes disruptive reset new image is incompatible
105 yes disruptive reset new image is incompatible
106 yes disruptive reset new image is incompatible
107 yes disruptive reset new image is incompatible
108 yes disruptive reset new image is incompatible
109 yes disruptive reset new image is incompatible
111 yes disruptive reset new image is incompatible
Additional info for this installation:
--------------------------------------
Remove QoS & ACL config on L3 interfaces and SVIs if any
Service \"fwm\" in vdc 1: Downgrading to a version lower than the current version (7.1(1)N1(1)). Downgrading to 7.0(5)N1(1a) is not supported. Downgrade needs to be disruptive.
(modified the impact to for module )
Switch will be reloaded for disruptive upgrade.
Do you want to continue with the installation (y/n)? [n]
go
Date: 2015-07-30 22:05:10 UTC on lance le downgrade
Date: 2015-07-30 09:32:14 UTC Reboot effectué
on reaaplique le work around au cas ou..
# debug hardware internal carmel dom-thread disable
Done.
#
On reprend ce soir pour le downgrade
Date: 2015-07-30 09:09:30 UTC reload en cours
Posted Jul 30, 2015 - 08:58 UTC
This scheduled maintenance affected: Infrastructure || RBX (RBX4).